DarenthMJS always recommend our range of drinks machines are plumbed into a mains water supply. For demonstration purposes however, or for rare occasions where a plumbed water supply just can’t be installed, we offer a choice of pumped water systems which allow hot drinks machines to be fed from a water storage bottle which is located in the base cabinet.
Pressure sensitive pump
- Low Water level detector within the pickup wand
- Senses pressure between the pump and machine’s inlet valve, this allows the pump to run automatically when required
- Mains powered, simply plugs into a 13A socket
- Easy installation simply connect the water inlet hose and plug the unit in
- Pump system can be fitted into a specially adapted base cabinet
Submersible pump
- The pump is submersed in the water bottle and is powered from a special low voltage power supply which is fitted inside the host machine
- Although less expensive than the system above, this system has no low-level detection so care needs to be taken to ensure that the bottle isn’t allowed to run dry
- Pump system can either be purchased as an individual component set or alternatively can be built and tested at the time of machine manufacture
- Pump system can be fitted into a specially adapted base cabinet